High-Flow Filter Elements
Uninterrupted Purity in Demanding Chemical and Industrial Processes
High-Flow Filter Elements
At Dantechs System and Filter Solutions, we offer High-Flow Filter Elements designed to manage high-volume liquid flows in the refinery, petrochemical, chemical and oil and gas industries. Thanks to its 6.0" nominal diameter and optimised surface geometry, this specialised range effectively filters enormous liquid flow rates using a single cartridge. By enabling you to use fewer filter elements and a smaller filter housing in your plant compared to traditional cartridges, it optimises both your initial investment and your operating costs (CAPEX/OPEX).
- Pleated Cellulose: 275 °F (~135 °C)
- Pleated Polypropylene: 180 °F (~82 °C)
- Pleated Polyester: 240 °F (~115 °C)
- Pleated Microglass: 275–450 °F (~135–232 °C)
- Nomex: 400 °F (~204 °C)
- Nylon / Cotton: 365 °F (~185 °C) / 300 °F (~149 °C)
- TRI-SHIELD Depth Type (Polyester / Polypropylene): 240 °F (~115 °C) / 180 °F (~82 °C)
Operating Principle
It is available in two different flow direction configurations, depending on your process design and hydraulic requirements:
- <\n
- Inside-to-Outside (In to Out): Ensures that contaminants are completely trapped within the filter element. This completely prevents contaminants from spilling into the housing during filter replacement and ensures that the clean fluid remains uncontaminated.
- Outside-to-Inside (Out to In): Fully compatible with traditional high-flow process architectures requiring maximum surface area and high contaminant retention capacity.
Technical Specifications
- <\n
- Superior Performance Efficiency: For particles of 0.5 microns and above, absolute filtration efficiency of up to 99.98 per cent.
- Low Pressure Drop: The initial differential pressure (Initial dP) is less than 2 lbs (approximately 0.13 bar).
- Recommended Replacement Differential Pressure: For system safety and optimum operating costs, cartridge replacement is recommended at a differential pressure of <35 PSID (2.4 bar).
- Wide Range of Hardware Options: Depending on process conditions, alternatives for the outer cage support and end caps include polypropylene, nylon, carbon steel or stainless steel.
Common Industrial Applications
- Natural Gas Liquids (NGL) Pipelines and Condensate Filtration (NGL Pipelines / Condensate)
- Amine and Glycol Circulation Lines (Amine / Glycol Re-boilers & Loops)
- Acid, Caustic and Corrosive Chemical Processes (Acids & Alkalis)
- Wastewater Disposal Wells and Produced Water (Water Disposal Wells / Produced Water)
- Industrial Solvents and Gas Oil Lines (Solvents / Gas Oil)
- High-Temperature Hydrocarbon Feed Lines (High Temp Hydrocarbon Feeds)